Mentions 2024
Seeding Drone
Kit for drones to distribute seed balls for reforestation.
What is innovative: the system itself, being able to distribute correctly the seed balls for reforestation. This implies that the distributor needs to manage the load of a single seed of irregular shape. In addition, the system is designed to avoid blockages.
Foreseen advantages: increase in productivity and effectiveness compared to similar solutions.
AIR DROPLETS CONTROL SENSOR
System for pneumatic sprayers to estimate and set the droplet diameter.
What is innovative: the system itself, which is based on a pressure sensor. That parameter is linked to air speed, which in turn determines the droplet diameter. So, the system allows to indirectly measure, and set, the droplet diameter. In traditional nozzles the control on the droplet diameter is usually easier, but within a limited range for a single type of nozzle. With this solution the control of the droplets' diameter is as accurate as for the traditional nozzles, but within a wider range.
Foreseen advantages: optimization of the distribution of the plant protection product, with a reduction in the environmental impact.
Kolisfera
Hybrid self-propelled tracked shredder.
What is innovative: the shredder has four separate batteries and an internal combustion engine. The batteries drive the electric motors for traction and for the shredding function. In case of low batteries, they are recharged by the engine.
Foreseen advantages: reduced environmental impact both for the increased efficiency and for the replacement of the hydraulic circuit with electric drives, which avoid potential contamination.
Nozzle Flow Monitor
Nozzle flow rate measuring system.
What is innovative: the device allows to continuously monitor the nozzle flow rate while spraying. This allows the operator to detect clogged or defective nozzles in real time.
Foreseen advantages: increased awareness about the correct operation of the machine, and reduced environmental impact.
NIMBUS SAFETY
Digital display/dashboard implementing both human-machine interface and vehicle control functions.
What is innovative: this is the only dashboard on the market which displays information, and includes the controls related to vehicle safety, such as vehicle management at the start, PTO management, engine speed control. The parameters for the vehicle management are designed to fulfill the highest possible safety level for electronic controls.
Foreseen advantages: for OEM, increased design flexibility.
AR 1604 AP GREEN OIL
Diaphragm pump for sprayers.
What is innovative: the lubrication system, which can work with a food grade lubricant, so it's even edible if present in traces in the final food product.
Foreseen advantages: the risk of food contamination is reduced; the operator's safety is increased.
Landini Rex4 Energy
Orchard tractor with integrated electric generator, giving a power of 10 kW at 48V.
What is innovative: the tractor has been redesigned in order to accommodate the generator, without an increase in the external dimensions or the need to mount an appendix.
Foreseen advantages: improvement in energy efficiency, controllability of the implements, reduction of turning radius due to the absence of a cardan shaft.
Tele-end Front loader
Telescopic front loader for agricultural tractors, with articulated loader arms.
What is innovative: compared to the very few telescopic front loaders already seen on the market, this solution encloses the telescopic mechanism inside the loader arms. In addition, the latter are articulated so to add greater maximum lifting height compared to loaders of the same size.
Foreseen advantages: increased productivity.
MEC V 1505 with mechanical variable track axle
Self-propelled sprayer with fully mechanical axles, differential lock, gear cascade and variable track width from the driver's seat.
What is innovative: in addition to the modular design for the entire sprayer, which allows for hundreds of possible final configurations, the machine can be equipped with fully mechanical gear cascade axles with differential lock and track width variation from the driver's seat.
Foreseen advantages: the axle solution allows simultaneously a ground clearance of up to 800 mm, continuous track width adjustment from the driver's seat, and maximized traction.
Reduced-dispersion quick-fit hydraulic fluid connector
Reduced-dispersion quick-fit hydraulic fluid connector.
What is innovative: the connector is fitted with a system to redirect the oil into the tractor hydraulic circuit at disconnection.
Foreseen advantages: reduced environmental impact.
HY-SE HOSE REEL
Electric irrigation reel.
What is innovative: the reel is fully electric, battery powered, and the energy to recharge comes from a solar panel installed on the machine. There is no hydraulic circuit, since the electric motor is directly connected to the winding gearbox.
Foreseen advantages: increased energy efficiency; decreased environmental impact for the energy production.
IRRIVISION
Decision Support System for irrigation based on Computer Vision technology.
What is innovative: the system itself, which adds to a traditional weather station a RGB camera and a thermal camera, plus the AI software to process the captured images and the leaf temperature values. The output is an irrigation recommendation.
Foreseen advantages: optimization in the use of water and in crop management.
Crop Speed Control system for forage harvester
Speed sensor for harvested crop passing through the shoot of a forage harvester.
What is innovative: the sensor integrated with the system, which is able to reduce substantially the risk of blockages during the unloading phase of a forage harvester.
Foreseen advantages: the sensor integrated with the system, which is able to reduce substantially the risk of blockages during the unloading phase of a forage harvester.
New Concept of integrated Weed Seed Mill
Weed seed crusher for combine harvester.
What is innovative: the design of the device, featuring a flail type rotor concept in a barrel type housing with abrasive cylinder wall surface.
Foreseen advantages: improved flexibility and efficiency.
Weeder-desuckerer
Mechanical weeder-desuckerer for vineyards.
What is innovative: its modular design and the wider range of rotational speed allow its use in very different conditions and for different jobs, such as removing weed and/or suckers.
Foreseen advantages: productivity increase.
TITANO EX/H
Forestry shredder for hydraulic excavators.
What is innovative: the shredder is equipped with a closed loop circuit for lubrication, with a dedicated pump and a heat exchanger.
Foreseen advantages: increased reliability.
Smilla_H2
Multi-purpose autonomous vehicle, battery powered with a fuel cell range extender.
What is innovative: in addition to the technology for autonomous driving, such as GPS and LiDAR systems, and to the electrical power for traction, the vehicle features a fuel-cell range extender which extends the operation by 80%. The hydrogen is stored in a metal hydride canister.
Foreseen advantages: the solution improves environmental and economical sustainability in particular when in the future the farm will be able to produce autonomously "green" hydrogen.
EdenViewer
Camera-based device for crop monitoring and management that can be installed on tractor already in use on the farm.
What is innovative: the device uses the ISOBUS protocol and has an AI-based software which allows vigor and fruit mapping, yield forecasting, variable rate application of chemicals, anomaly diagnosis. It has been developed for pome fruits, vineyards and stone fruits.
Foreseen advantages: increased productivity and reduced environmental impact. The yield forecast also allows a better farm planning, both from commercial and logistical perspectives.
Enoduo 920
Two-wheels rotary rake.
What is innovative: the rake arms of the two rotors intersect during their motion. In addition, the rotational speed of the rotors is reduced compared to similar solutions. This allows the forage to be moved also at the center of the swath, avoiding a subsequent pass.
Foreseen advantages: increased overall efficiency of the process, reduced forage contamination.
PRIMA SLIDING
Independent suspension for agricultural trailer with variable track width.
What is innovative: first axle for agricultural trailers with independent suspension and variable track width.
Foreseen advantages: the solution encompasses both the advantages of the variable track width with those of the independent suspension.
Twistweed AI
Mechanical weeder with tools actuated by electric motors and controlled by Artificial Intelligence.
What is innovative: compared to similar solutions having the same technological level, this weeder optimizes the tool path so that it always works in the subsoil. In addition, the plants do not need to be spaced longitudinally according to a very precise scheme.
Foreseen advantages: increased operating speed and flexibility, increased accuracy, lower plant contamination by the soil moved by the tools.
TWIN
Vegetable harvester for greenhouses.
What is innovative: the machine features two counter-rotating conveyor belts, instead of one as in traditional machines. This allows them to be more inclined towards a vertical plane, and the machine is overall more compact and more suitable to be operated in greenhouses. In addition, it features automatic boxing of the harvested vegetable.
Foreseen advantages: increased productivity.
Picker MOD. FRS 124
Trailed harvester for olives and drupaceous.
What is innovative: the rotors have been redesigned in order to be more gentle and more effective towards the fruit; this has been achieved with idler brushes with an inclined rotational axis.
Foreseen advantages: increased productivity.
SmartSense
Electronically adjustable tree-presence sensor for inter-row machines.
What is innovative: the possibility to set the position and the sensitiveness of the sensor from the tractor's cab. .
Foreseen advantages: improved operator's comfort, increased productivity when working on different plots or crops.
MT15-E
Electric irrigation reel.
What is innovative: the reel is fully electric, battery powered, and the energy to recharge comes from a solar panel installed on the machine.
Foreseen advantages: increased energy efficiency; decreased environmental impact for the energy production.
Commander SFIDA - Intelligent Fertigation System for biofortified agricultural production
Digital environment for irrigation and fertigation.
What is innovative: compared to other software solutions which give irrigation and fertigation advice, this one uses at the same time three different sources of information. In detail, the system uses proximity sensors around the plant, plant sensors to determine the sap flow and satellite vision with NDVI. It also has algorithms that predict the onset of a fungal disease. Upon commercial agreements, the system is open to work with software and/or data coming from third parties.
Foreseen advantages: increased productivity and reduced environmental impact.
CarverAI
Artificial intelligence tool designed to optimize the design and management of irrigation systems.
What is innovative: the solution provides design suggestions for an irrigation system of a specific crop, including emitter flow rates, pipe sizes and others, based on data given by the user such as plant arrangement, row spacing, water capacity, and water requirements. Compared to other software solutions, the integration with AI allows for continuous improvement as well as for multiple possible suggestions starting from the same inputs.
Foreseen advantages: increased flexibility and easy to use.
LS 20 - Spot Fan Nozzle - ARE 30 - Band spraying
Flat spray nozzles.
What is innovative: the first one is optimized for spot/patch spraying thanks to its reduced spray angle (20°) and its parabolic spray pattern. The second one is optimized for band spraying and features a spray angle of 30° and a rectangular spray pattern.
Foreseen advantages: maximize spraying effectiveness, reduce the environmental impact.
Xamount - Lechler CTS System
Automated closed transfer system for chemicals.
What is innovative: the only operation done by the operator is to position the canister on the transfer system, and to give the appropriate input to the interface. All the other actuations are done by electric motors and valves, including washing of the canister cap.
Foreseen advantages: increased operator's comfort.
Smart Weighing System - SWS
Weighing system for telehandlers.
What is innovative: the system continuously monitors the weight of the load carried by the attachment, and also offers other functions. It does not require calibration, nor is limited to a specific position of the boom.
Foreseen advantages: increased productivity.
Orange Harvesting System
Remote-controlled vehicle with automatic orange picker.
What is innovative: the system is able to locate, pick and put the oranges in boxes from the plant thanks to four anthropomorphic arms.
Foreseen advantages: increased productivity.
TF43.7e
Medium sized electric telehandler.
What is innovative: sufficient battery autonomy to cover a work shift of 8 hours according to the VDI cycle. The vehicle features a battery cooling system and a "type 2" socket, the same as in the automotive sector, and it offers the same or better performance compared to a similar combustion-engine telehandler.
Foreseen advantages: increased operator's comfort, zeroing the direct emissions of exhaust gases.
VoltWinch
Electrical traction winch for forestry vehicles such as forwarders or harvesters.
What is innovative: the winch has an electric motor and it recovers energy during the descent phase.
Foreseen advantages: increased energy efficiency.
Sprayer GEO H-FAN 85HF-1002T
Trailed bush and tree sprayer.
What is innovative: the fan can be positioned at different heights depending on the plant to be sprayed. In addition, the diaphragm pump is fitted on the part of the steering drawbar which is attached to the tractor, so that the angle of the cardan shaft is kept constant at turns.
Foreseen advantages: improved flexibility in the use of the machine.
Leader Solis et Pluvia
Electric irrigation reel with solar panels.
What is innovative: the energy to recharge the battery comes from the solar panel, so to ensure continuous operation of the reel.
Foreseen advantages: reduced environmental impact.
EIDOS FULL ELECTRIC
Electric towed sprayer.
What is innovative: each side of the sprayer has three fans, actuated by electric motors and independently controlled, and nine nozzles in total, which can be controlled in groups of three. The sprayer automatically turns off the delivery pump during turns. In that phase, the sprayer follows exactly the path of the tractor, thanks to a specifically designed towing system. It features a magnetic drive pump.
Foreseen advantages: reduced environmental impact keeping the same effectiveness.
360° Autonomous swingable overhang
Autonomous overhang for irrigation machines such as pivot, ranger.
What is innovative: the overhang is able to rotate around a 360° angle. In addition, sensors determine its angular position and the need to open or close the sprinkler valves.
Foreseen advantages: increased performances and ability to cover fields with irregular borders compared to current solutions.
Mechanical weeder HAPPY PLANT
Mechanical weeder for vineyards with protective deflectors.
What is innovative: the plastic vertical protective deflectors, which avoid the impact of the wire with the plants of the vineyard.
Foreseen advantages: increased productivity and vineyard protection.
ACTIVE FLOATING PLUS
Articulated arm-type mower for road side maintenance with high efficiency floating system.
What is innovative: compared to other solutions, the floating arm system adopts a closed loop control which, by means of an accumulator, allows energy absorption to be optimized and to offer adequate readiness to the system.
Foreseen advantages: improved performance and energy efficiency.
ROBOFOX ELECTRA INTELLIGENT DRIVE
Battery-powered autonomous tracked mower.
What is innovative: the mower has a LiDAR system for its localization and to map the environment, so as to increase the accuracy of the operations.
Foreseen advantages: increased accuracy of the system.
AudiPlant
AI-based fertigation system.
What is innovative: the possibility to autonomously, locally and independently distribute up to four nutrients according to the plant's needs.
Foreseen advantages: reduced environmental impact, both for the reduction in the use of nutrients and water.
Micro Bird® Jet
Micro-sprinkler for irrigation.
What is innovative: it has a reversible deflector, which makes it suitable for different growth stages, from development to maturity.
Foreseen advantages: increased versatility.
Pneumatic orchard and vineyard fertilizer spreader MEGLIO
Fertilizer spreaders for orchards.
What is innovative: the dosing and the distributing systems, which are respectively made of electronic augers and pneumatic devices. The system is more accurate and robust compared to those using scale sensors, which can be inaccurate on slopes and need calibration.
Foreseen advantages: increased accuracy and productivity.
FLORIX - Mechanical flower thinning machine
Mechanical flower thinning machine.
What is innovative: each flower thinning arm is independently articulated from the chassis. In addition, the rotors are vertically grouped into two sections which may rotate at different speed, to differentiate the quantity of removed flowers along the tree according to the needs.
Foreseen advantages: increased penetration of the flower thinning tool into the tree crown and increased accuracy.
DO.VA.R.T. Spraying
Retrofit kit for orchard sprayers with PWM nozzles and air deflectors.
What is innovative: the combination of more than one technology in a retrofit kit which substantially reduces the environmental impact of the sprayed product, maintaining the effectiveness.
Foreseen advantages: reduced environmental impact.
RAIN VOICE for Rain (270) Ecosystem
System for irrigation management with reels.
What is innovative: the system is equipped with voice activation. It can be managed by voice through the app, from anywhere (office, home, car) at any time.
Foreseen advantages: easy to use.
SNIPER
ISOBUS kit for bush and tree pressure sprayers to enable variable volume spraying.
What is innovative: the kit has been developed with the aim of containing costs. Its modular design allows to further improve the system for real-time precision spraying. It is adaptable to all bush and tree pressure sprayers and features connectivity for data exchange.
Foreseen advantages: reduction of costs and environmental impact.
ZAM 270 BL MAXI
Double body dumping grape trailer with rigid watertight covering that can be opened on both sides (left and right).
What is innovative: first cover for an agricultural dumper that is rigid, watertight and can be opened on both sides.
Foreseen advantages: productivity and safety increase especially for road circulation. Improvements in grapes protection during transport.





















































